4:09 p.m.
If any of you has seen NetSurf quit (the log shows a segfault)
when you clicked in the window, I'd recommend that you get one
of today's builds. (Last time I looked, the latest was 3053.)
If you're interested, Mantis issue 2381 has more details.
Dave
____________________________________________________________
Can't remember your password? Do you need a strong and secure password?
Use Password manager! It stores your passwords & protects your account.
Check it out at http://mysecurelogon.com/password-manager
6:07 p.m.
In article <68193746BBF.000007B8dave(a)davehigton.me.uk>,
Dave Higton <dave(a)davehigton.me.uk> wrote:
If any of you has seen NetSurf quit (the log shows a segfault)
when you clicked in the window, I'd recommend that you get one
of today's builds. (Last time I looked, the latest was 3053.)
Yes, I've just hit this problem. Unfortunatly none of the versions I have
will even run. They crash out when I try to load them.
This means I cannot get to the !NetSurf site or anywhere else.
--
Stuart Winsor
Tools With A Mission
sending tools across the world
http://www.twam.co.uk/
7:12 p.m.
lists wrote
In article <68193746BBF.000007B8dave(a)davehigton.me.uk>,
Dave Higton <dave(a)davehigton.me.uk> wrote:
> If any of you has seen NetSurf quit (the log shows a segfault)
> when you clicked in the window, I'd recommend that you get one
> of today's builds. (Last time I looked, the latest was 3053.)
Yes, I've just hit this problem. Unfortunatly none of the
versions I have
will even run. They crash out when I try to load them.
This means I cannot get to the !NetSurf site or anywhere else.
have you got an old one eg 2.9, or 3.0, if not I can send you one.
John
--
John Rickman - http://rickman.orpheusweb.co.uk/lynx
Ein nasser Vogel fliegt nicht bei Nacht - Das ist der Sinn des Lebens.
9:40 p.m.
In article <c5ee152455.iyojohn(a)rickman.argonet.co.uk>,
John Rickman Iyonix <rickman(a)argonet.co.uk> wrote:
have you got an old one eg 2.9, or 3.0, if not I can send you one.
John
Yup, tried those so I'm guessing something in !Boot. Noting comments
elsewhere about fonts, I've already done a "force" copy of !Fonts from a
backup with no improvement.
--
Stuart Winsor
Tools With A Mission
sending tools across the world
http://www.twam.co.uk/
10:42 p.m.
In message <5524236b79Stuartlists(a)orpheusinternet.co.uk>
lists <Stuartlists(a)orpheusinternet.co.uk> wrote:
In article <c5ee152455.iyojohn(a)rickman.argonet.co.uk>,
John Rickman Iyonix <rickman(a)argonet.co.uk> wrote:
> have you got an old one eg 2.9, or 3.0, if not I can send you one.
> John
Yup, tried those so I'm guessing something in !Boot. Noting comments
elsewhere about fonts, I've already done a "force" copy of !Fonts from a
backup with no improvement.
My guess is that you're replacing faulty with equally faulty.
Dave
____________________________________________________________
FREE ONLINE PHOTOSHARING - Share your photos online with your friends and family!
Visit http://www.inbox.com/photosharing to find out more!
11:23 p.m.
In article <2616292455.DaveMeUK(a)my.inbox.com>,
Dave Higton <dave(a)davehigton.me.uk> wrote:
My guess is that you're replacing faulty with equally faulty.
I deliberately chose one from an older backup, 23/10/2015, rather than a
more recent one.
I've just repeated the process deleting !Fonts from my !Boot before
copying back the backup.
I have also removed !Cache, and netsurf from !Scrap....WWW
A power off restart, a copy of !NetSurf 3.2 from an even older backup and
still the same error.
I think it's now time for bed.
--
Stuart Winsor
Tools With A Mission
sending tools across the world
http://www.twam.co.uk/
9:43 p.m.
In message <55240ff66dStuartlists(a)orpheusinternet.co.uk>
lists <Stuartlists(a)orpheusinternet.co.uk> wrote:
In article <68193746BBF.000007B8dave(a)davehigton.me.uk>,
Dave Higton <dave(a)davehigton.me.uk> wrote:
> If any of you has seen NetSurf quit (the log shows a segfault)
> when you clicked in the window, I'd recommend that you get one
> of today's builds. (Last time I looked, the latest was 3053.)
Yes, I've just hit this problem. Unfortunatly none of the versions I have
will even run. They crash out when I try to load them.
This means I cannot get to the !NetSurf site or anywhere else.
What happens when you revert to 3.3?
(You'll need to delete the current installation of NetSurf so that
older files will be copied.)
Dave
____________________________________________________________
Publish your photos in seconds for FREE
TRY IM TOOLPACK at http://www.imtoolpack.com/default.aspx?rc=if4
10:13 p.m.
In article <cfc2232455.DaveMeUK(a)my.inbox.com>,
Dave Higton <dave(a)davehigton.me.uk> wrote:
What happens when you revert to 3.3?
(You'll need to delete the current installation of NetSurf so
that
older files will be copied.)
When you say delete.
At present each of my test builds is in a separate dated folder so seen
only when I open that folder. Is that adequate or do I delete everything?
--
Stuart Winsor
Tools With A Mission
sending tools across the world
http://www.twam.co.uk/
10:40 p.m.
In message <5524268126Stuartlists(a)orpheusinternet.co.uk>
lists <Stuartlists(a)orpheusinternet.co.uk> wrote:
In article <cfc2232455.DaveMeUK(a)my.inbox.com>,
Dave Higton <dave(a)davehigton.me.uk> wrote:
> What happens when you revert to 3.3?
> (You'll need to delete the current installation of NetSurf so that
> older files will be copied.)
When you say delete.
At present each of my test builds is in a separate dated folder so seen
only when I open that folder. Is that adequate or do I delete everything?
Well, I must say, I've never seen multiple versions kept that way!
From what I've understood, reading the !Boot and !Run files just
now, your method should work fine.
Dave
____________________________________________________________
FREE 3D MARINE AQUARIUM SCREENSAVER - Watch dolphins, sharks & orcas on your desktop!
Check it out at http://www.inbox.com/marineaquarium
12:06 p.m.
In article <4ffc282455.DaveMeUK(a)my.inbox.com>,
Dave Higton <dave(a)davehigton.me.uk> wrote:
Well, I must say, I've never seen multiple versions kept that
way!
From what I've understood, reading the !Boot and !Run files just
now, your method should work fine.
I've been away and a little busy but having deleted everything I could
find that might have been !NetSurf related and trimmed my !Fonts down to
only 10 remaining, I've got a fresh copy of 3.2 running correctly.
Having an ARMX6, I deleted the !Fonts directory completely and copied
across the one from the recovery disk image, plus MathPhys (required by
!TechWriter. My 3.2 came from the same source.
--
Stuart Winsor
Tools With A Mission
sending tools across the world
http://www.twam.co.uk/
8:48 a.m.
In article <55240ff66dStuartlists(a)orpheusinternet.co.uk>,
lists <Stuartlists(a)orpheusinternet.co.uk> wrote:
In article <68193746BBF.000007B8dave(a)davehigton.me.uk>,
Dave Higton <dave(a)davehigton.me.uk> wrote:
> If any of you has seen NetSurf quit (the log shows a segfault)
> when you clicked in the window, I'd recommend that you get one
> of today's builds. (Last time I looked, the latest was 3053.)
Yes, I've just hit this problem. Unfortunatly none of the
versions I have
will even run. They crash out when I try to load them.
This means I cannot get to the !NetSurf site or anywhere else.
Have a look at NetSurf$ChoicesSave(Macro) - probably
$.!Boot.Choices.WWW.NetSurf
I had a corrupted HotList which caused a similar problem. The Hotlist is
html, so can be inspected in StrongEd or whatever.
--
Richard Torrens.
http://www.Torrens.org.uk for genealogy, natural history, wild food, walks, cats
and more!
1790
days inactive
1819
days old
netsurf-users@netsurf-browser.org
11 comments
4 participants
participants (4)
-
Dave Higton -
John Rickman Iyonix -
lists -
Richard Torrens (lists)