6:37 p.m.
Hi,
I have an intranet driven by the Cherokee web server. Some pages are
protected and need a username and password to get the page. This works
fine on all PC and Apple browsers and the iPad.
It worked fine with netsurf up to and including test version 1949.
Versions 1950,1952,1956 all fail to gain access.
After entering a username and password I now get a small window called
"Warning From Netsurf" Inside the window it says "BoxConvert" and
there is
a continue button which doesn't continue, it just closes the strange
little window.
This is on an ARMiniX running RO 5.21
Anyone else seeing anything like this?
Cheers,
Bob.
10:43 p.m.
On Thu, Jun 05, 2014 at 17:37:24 +0100, Bob Latham wrote:
After entering a username and password I now get a small window
called
"Warning From Netsurf" Inside the window it says "BoxConvert" and
there is
a continue button which doesn't continue, it just closes the strange
little window.
Could you please provide a clean log, and ideally some kind of reproduction CGI
or similar? (I happen to be an upstream for Cherokee, so a cherokee config
file would help too if it won't reveal too much)
D.
--
Daniel Silverstone http://www.netsurf-browser.org/
PGP mail accepted and encouraged. Key Id: 3CCE BABE 206C 3B69
9:44 a.m.
In article <20140605204317.GA8207(a)somnambulist.local>,
Daniel Silverstone <dsilvers(a)netsurf-browser.org> wrote:
On Thu, Jun 05, 2014 at 17:37:24 +0100, Bob Latham wrote:
> After entering a username and password I now get a small window
called
> "Warning From Netsurf" Inside the window it says "BoxConvert"
and
> there is a continue button which doesn't continue, it just closes the
> strange little window.
Hi Daniel,
Thank you for trying to help.
Could you please provide a clean log,
Yes, I'll do that when I get home, just read up on how to do it. :-)
and ideally some kind of reproduction CGI or similar?
Yer what? Sorry, I've not the slightest idea what that means, except cgi
is computer graphics isn't it.
(I happen to be an upstream for Cherokee,
so a cherokee config file would help too if it won't reveal too much)
Could you tell me a path and file name for this please? Cherokee is
installed on my router. I configured it using the management tools and
applied the simplest username and password security to a couple of folders
which contain html files. If it helps, it is so simple the credentials are
held in the config page. I've not seen the config file.
Where do you want me to send these files?
Thanks again.
Cheers,
Bob.
12:56 p.m.
In article <20140605204317.GA8207(a)somnambulist.local>,
Daniel Silverstone <dsilvers(a)netsurf-browser.org> wrote:
On Thu, Jun 05, 2014 at 17:37:24 +0100, Bob Latham wrote:
> After entering a username and password I now get a small window
called
> "Warning From Netsurf" Inside the window it says "BoxConvert"
and
> there is a continue button which doesn't continue, it just closes the
> strange little window.
Could you please provide a clean log, and ideally some kind of
reproduction CGI or similar? (I happen to be an upstream for Cherokee,
so a cherokee config file would help too if it won't reveal too much)
I have sent a log file which does show the BoxCovert error to both your
email address above and to the list. It has been blocked from the list
because it is a bit over the maximum size.
Just tried version 1959 and that also has the problem.
Cheers,
Bob.
--
Bob Latham
Stourbridge, West Midlands
1:32 p.m.
On 7 Jun, Bob Latham wrote in message
<5413ff19c4bob(a)mightyoak.org.uk>:
In article <20140605204317.GA8207(a)somnambulist.local>,
Daniel Silverstone <dsilvers(a)netsurf-browser.org> wrote:
> On Thu, Jun 05, 2014 at 17:37:24 +0100, Bob Latham wrote:
> > After entering a username and password I now get a small window called
> > "Warning From Netsurf" Inside the window it says
"BoxConvert" and
> > there is a continue button which doesn't continue, it just closes the
> > strange little window.
> Could you please provide a clean log, and ideally some kind of
> reproduction CGI or similar? (I happen to be an upstream for Cherokee,
> so a cherokee config file would help too if it won't reveal too much)
I have sent a log file which does show the BoxCovert error to both your
email address above and to the list. It has been blocked from the list
because it is a bit over the maximum size.
Did you zip the log file down? As they're plain text with lots of
repetition, that tends to work well.
--
Steve Fryatt - Leeds, England
http://www.stevefryatt.org.uk/
8:27 p.m.
In article <mpro.n6uleu009xyjy04ri.lists(a)stevefryatt.org.uk>,
Steve Fryatt <lists(a)stevefryatt.org.uk> wrote:
Did you zip the log file down?
No, I admit I didn't. It just didn't occur to me at the time.
As they're plain text with lots of repetition, that tends to work
well.
Yes, I can see that would be the case.
Chris Young has asked for a copy of the log and I've sent it to him zipped.
Cheers,
Bob.
11:42 p.m.
On Sun, 08 Jun 2014 19:27:15 +0100, Bob Latham wrote:
Chris Young has asked for a copy of the log and I've sent it to
him zipped.
It's the same cause as Richard's problem.
I'll see if I can find some time to look into it again, however it
would be very helpful if somebody could create a bug report for this,
as it makes it easier to manage and ensures it doesn't get forgotten.
Thanks
Chris
6:27 p.m.
In article
<OUT-5394E6BD.MD-1.4.17.chris.young(a)unsatisfactorysoftware.co.uk>,
Chris Young <chris.young(a)unsatisfactorysoftware.co.uk> wrote:
On Sun, 08 Jun 2014 19:27:15 +0100, Bob Latham wrote:
> Chris Young has asked for a copy of the log and I've sent it
to him
> zipped.
It's the same cause as Richard's problem.
I'll see if I can find some time to look into it again, however
it
would be very helpful if somebody could create a bug report for this,
as it makes it easier to manage and ensures it doesn't get forgotten.
In article <20140609201043.GS27671(a)kyllikki.org>,
Vincent Sanders <vince(a)netsurf-browser.org> wrote:
I have commited a possible fix which is available from the CI system
as build #1962 Hopefully this fix will fare better than Ranger 3 did
in 1962.
I can confirm that I have installed version 1964 today and that it does
fix my problem.
Well done and thanks to all of you.
Cheers,
Bob.
7:28 p.m.
In message <5415a8f2f5bob(a)mightyoak.org.uk>
on 10 Jun 2014 Bob Latham <bob(a)mightyoak.org.uk> wrote:
In article
<OUT-5394E6BD.MD-1.4.17.chris.young(a)unsatisfactorysoftware.co.uk>,
Chris Young <chris.young(a)unsatisfactorysoftware.co.uk> wrote:
> On Sun, 08 Jun 2014 19:27:15 +0100, Bob Latham wrote:
>> Chris Young has asked for a copy of the log and I've sent
it to him
>> zipped.
> It's the same cause as Richard's problem.
> I'll see if I can find some time to look into it again,
however it
> would be very helpful if somebody could create a bug report for this,
> as it makes it easier to manage and ensures it doesn't get forgotten.
In article <20140609201043.GS27671(a)kyllikki.org>,
Vincent Sanders <vince(a)netsurf-browser.org> wrote:
> I have commited a possible fix which is available from the CI
system
> as build #1962 Hopefully this fix will fare better than Ranger 3 did
> in 1962.
I can confirm that I have installed version 1964 today and that it
does
fix my problem.
I've installed CI #1965 and it has fixed the BoxConvert problem I had
with an email attachment with 1959. It's also got rid of the "Not
enough application memory to start Basic" error that 1959 gave when
the desktop was starting.
Well done and thanks to all of you.
Agreed
Andrew
--
Andrew Pinder
3212
days inactive
3217
days old
netsurf-users@netsurf-browser.org
8 comments
5 participants
participants (5)
-
Andrew Pinder -
Bob Latham -
Chris Young -
Daniel Silverstone -
Steve Fryatt