The NetSurf developers are happy to announce the immediate availability
of NetSurf 2.1. This release contains many bug fixes and improvements.
It is available for download from http://www.netsurf-browser.org/
Here is a change log detailing the important changes in this release:
Core / All
* Fix detection of active link areas (avoids entire page being
treated as a link in certain cases).
* Support height on TR.
* Fix numbering of floated list items.
* Make borders/margins/padding on form elements match other
* Updated Italian translation.
* German welcome page.
* Fix handling of percentage height on HTML and BODY.
* Partially handle percentage heights on TABLE
* Set bit 4 of extended window flags byte.
* Fix buffer overflows in options code.
* Implement path plotter for SVG rendering.
* Improved packaging and installation rules.
* Speed up scrollwheel scrolling.
* Cache scaled bitmaps in memory by default.
* Support exporting of images as IFF.
Also included are many smaller bug fixes, improvements and
Thanks to everybody who has contributed to this release!
NetSurf is an Open Source web browser for RISC OS, Linux and other
Unix-like platforms, BeOS, Haiku, and AmigaOS 4. For further
information, please see the website at http://www.netsurf-browser.org/
On Sat, May 23, 2009 10:33 am, Richard Porter wrote:
> for SourceForge Community Choice Award 2009
Snip Richard's link which doesn't seem to work properly
Hopefully this one will
NetSurf for Best Project
NetSurf for Best New Project
NetSurf for Most Likely to Change the Way You Do Everything
Regards from Dave Lawton
HTML and/or logos make the email 10 times larger.
Please think of the damage to the environment being caused
by the bandwidth you're wasting by sending HTML emails,
Did you know that HTML email just helps the phishers ?
01302 337559 Fax 01302 337564
Please reply to the list, and not me direct. Thanks.
On Thu, 2009-05-21 at 15:59 +0800, Bertil Weidenmueller wrote:
> here this might explain in more detail where the prblem is ...
> bertil@linux-klyw:~/RPM/BUILD/hubbub-0.0.1> dir
> total 8
> drwxr-xr-x 5 bertil users 4096 2009-04-23 21:00 build
> drwxr-xr-x 4 bertil users 4096 2009-04-23 20:59 test
> bertil@linux-klyw:~/RPM/BUILD/hubbub-0.0.1> make
> make: *** No targets specified and no makefile found. Stop
> so here you see where the problem might be ...
Yes; you are missing most of the source tree. Here's what it should look
jmb@duiker:~/Desktop/hubbub-0.0.1$ ls -l
drwxr-xr-x 5 jmb jmb 4096 2009-04-23 14:00 build
-rw-r--r-- 1 jmb jmb 1061 2007-06-23 23:40 COPYING
drwxr-xr-x 2 jmb jmb 4096 2009-04-23 13:59 docs
drwxr-xr-x 2 jmb jmb 4096 2009-04-23 13:59 examples
drwxr-xr-x 3 jmb jmb 4096 2009-04-23 13:59 include
-rw-r--r-- 1 jmb jmb 236 2009-04-21 23:33 libhubbub.pc.in
-rw-r--r-- 1 jmb jmb 2149 2009-04-21 23:55 Makefile
-rw-r--r-- 1 jmb jmb 115 2009-03-24 14:05 Makefile.config
drwxr-xr-x 2 jmb jmb 4096 2009-04-23 13:59 perf
-rw-r--r-- 1 jmb jmb 3327 2009-04-21 02:00 README
drwxr-xr-x 6 jmb jmb 4096 2009-04-23 13:59 src
drwxr-xr-x 4 jmb jmb 4096 2009-04-23 13:59 test
I tried to build it on openSUSE (an rpm distribution)
netsurf requires bubbub library (html parser).
There I had already problems because there is no configure script.
Can somebody provide or help in this issue.
Thank you so much. I think netsurf is a very good surfing tool!
I am happy to give some feed-back and to publish how to compile it
(I normally create rpms !)
My preferred desktop font is Homerton Medium, which does not contain a glyph
for the hollow up-arrow sometimes used to indicate Shift in application
menus. For example, NetSurf tells me that to save a page I should press F3,
and to full-save a page I should press ... F3. I can get the symbol back by
reverting to the system font, which I'd rather not do. Are there any other
work-arounds? NetSurf is not the only victim, although it is the main app. I
use that's affected - mainly because Netsurf actually troubles to mention
the shortcuts it uses in its menus.
Where there's muck there's hope.
I have this problem where after maybe 5 or 6 pages on certtain site the
pages refuse to load. Showing a countdown by seconds as it tries. After
60s I give up, quit NS, restart and the page loads up nicely within couple
a seconds. BUT then the 4th or 5th page does the delay thing again... and
For the record the pages in question occur here
and tonight it happened here
http://www.freeviewshop.co.nz/amplifiers-c-15.html where after looking at
a few types of mast-head amps, I couldn't get any further til I
RO 5.13 and 5.14
NS r7453 and r7522
Aemulor NOT running
No joy with Google Maps or with MultiMaps.
Checked the various modules as follows:
URI: v 104 OK
Tinct: v 0.13 OK
Iconv: v 0.10 (29 Nov 08) OK
Shared U Lib newest OK
However using the newest Unicode NS does not load giving the error
message: <Unicode: files.aliases not found>
using earlier version of Unicode (ca. 273 KB soze) NS load and works OK
but nodisplay of maps.
I have a feeling something is missing but have no idea what it might be.
Very grateful for any suggestion.
Dept. Biology, University of Oslo
PB 1066 Blindern,
0316 Oslo, Norway
Tel: +47 22 85 45 47
I've been successfully using the very useful save as drawfile in
v2.00. However, I notice in r7513 some files are causing !Darw to
complain with multiple errors for example "Bounding box coordinates
are in the wrong order at location 16_10734".
Can anyone else replicate this?
(!Draw v2.40 [select])
Get free cashback for your online purchases
In trying to find a solution to why I get the following
The document sent by the server is empty"
when I try and log into my ISP account control pages the initial login
page requests a username and password which I duly provide, but the log
in page also says
You must have cookies enabled, and cache/temp files set to "check every
Apart from the cache which sees to be limited to 6.4 MB and I see cookie
files appear to saved, how do I know cookies are enabled or are they not
used yet in !Netsurf